Roofing Services for Fountaintown Homes and Garages

Financing provided by Slice, Foundation Finance, Regions. Subject to credit approval. Rates, terms, and promotional periods are set by the lender and disclosed in writing before you sign.

Recent Fountaintown Roofing Projects

5 before-and-after projects documented for the homeowner and the homeowners insurance carrier.

What the Written Estimate Actually Says

A number spoken in your driveway is worth nothing. What you should end up holding is a document that describes the job well enough that a different crew could pick it up and build the same roof. Ours starts with the measurement, the slopes and their pitches, and the total area in squares, so you can see that the price is tied to something countable instead of to a guess about your house.

Under that come the line items in the order the work happens. Tear-off and how many layers are coming off, disposal, the decking allowance with a rate per board or sheet and a quantity included, the underlayment, the ice and water membrane at the eaves and in the valleys, starter along the rakes and eaves, the field material, hip and ridge, and every piece of flashing by location. Ventilation appears on its own line with the intake and exhaust listed separately, because that's a decision you should get to make on purpose.

The parts that aren't included matter just as much. Our exclusions are written out where you can see them, along with the specific conditions that would trigger a change order and how you would be notified. Any change gets photographed, priced, and approved by you in writing before the work happens, so the last day of the job holds no surprises.

The back page covers the ordinary business items. How the payment schedule works and what's due when, roughly how long the job takes on a house like yours, who is responsible for the permit if your town requires one, what the workmanship coverage includes and for how long, and how that differs from the material coverage that comes from whoever made the shingles.

Read that page carefully, because it's where most of the disputes we hear about would have been prevented. If anything in it is unclear, ask, and if the answer you get is vague, ask again until it's written down in words you would be comfortable reading back to somebody a year from now.

Why a Fall Look Pays for Itself

If you only have somebody up on your roof once, make it the fall. Everything that is about to be tested by winter is visible then, and every one of those items is cheaper to address while the weather is still mild.

A cracked collar around a plumbing stack is a quick job in October. The same collar in January, with a stain spreading on a bedroom ceiling, becomes an emergency call, a temporary patch, and then the real repair when it warms up.

A fall inspection is looking for a specific set of things. Sealant at the chimney and any sidewall, since those joints spent the summer expanding and contracting. Fastener condition and lifted tabs, which wind will find as soon as the systems start rolling through.

Valley wear, because valleys carry the melt in the spring and take the most abuse. And the gutters, which need to be clear before the first freeze so meltwater has somewhere to go instead of pooling at the eave and turning into ice.

The attic half matters just as much in the fall. Insulation that has drifted or been compressed, eave vents blocked by that insulation, a bath fan blowing moist air into the space, or a hatch that doesn't seal are all things that create ice at the eaves once the snow arrives. Every one of them is easy to fix in mild weather and impossible to reach comfortably when the attic is freezing and full of blown insulation dust.

The honest reason we push this is that winter leak calls are miserable for everyone. We do them, and we get people dried in, but a temporary repair on a cold roof isn't the same as a proper one, and the homeowner ends up paying twice. An hour in the fall usually prevents that entirely, and if it turns out your roof needs nothing, that is worth knowing too before the first hard freeze arrives.

Additions and Porch Roofs in Fountaintown

A lot of the houses around here aren't quite what the builder handed over. Garages became family rooms, back porches got enclosed, sunrooms went on where a patio used to be, and every one of those changes left a seam in the roof. Those seams are where we spend our attention, because a transition between an original roof and an addition involves two framing depths, two decks that were never planed to match, and often two pitches meeting at an awkward angle.

The usual trouble sits at the wall. When an addition ties into the side of the house instead of continuing an existing slope, water coming down the main roof has to be carried out past the new roofline, and that only works if the flashing was woven in while the shingles were going on. Added later from the top, it becomes a strip of metal lying on the surface holding back water by way of sealant, and that arrangement leaks eventually without exception.

Pitch changes cause their own headaches. Where a steep original roof runs down onto a shallow addition, the water arrives fast and meets a surface that sheds slowly, and ordinary shingles at that lower angle won't keep up with it. The right answer is usually a different covering on the shallow section with the transition detailed in metal, and it belongs on the estimate as its own line, with a price you can actually look at.

Ventilation is the piece homeowners never see coming. Enclosing a porch or finishing a room over the garage frequently seals off the eave that used to feed air into the main attic, so now part of the house has intake and part has none at all. We look for that on every home that has been added onto, because it explains a surprising number of roofs that wore out long before they should have, and correcting it while the roof is open costs a fraction of what it takes afterward.

Ask About the Last Day on Your Fountaintown Roof

Homeowners tend to ask about materials and price and forget to ask about the part they'll actually experience, which is what your property looks like when the trucks pull away. Start with where the debris goes during tear-off.

Tarps on the ground and against the walls, plywood over anything fragile, and a dumpster or trailer positioned so the driveway does not take the hit. Ask what protects the landscaping along the drip line, since that is where most of the old roof lands.

Then ask about nails, because that's the complaint we hear most often about other people's work. A tear-off releases thousands of fasteners, and gravity puts a fair number of them in your yard.

The answer you want involves a rolling magnet run across the drive, the walkways and the perimeter at the end of every day instead of once when the whole job is finished, plus a pass over the lawn where children and pets go. Ask what happens if you find one afterward, and listen for whether somebody comes back without an argument.

Gutters deserve their own question. They collect granules, nail shanks and shingle fragments during a tear-off, and a crew in a hurry will leave all of it sitting there to plug your downspouts by fall.

Ask whether they're cleared before the crew leaves. Ask the same about the roof of a lower porch, a deck or a screened enclosure, which are easy to overlook and easy to damage.

Finally, ask whether somebody walks the job with you at the end. Not a text message saying it's finished, but a person on site while you look at the ridge line, the flashing at the walls, the cut of the valleys and the state of the yard.

That walk is where small things get fixed in ten minutes instead of turning into phone calls. If a company doesn't do one, ask why, because it costs them almost nothing and tells you what they think happens after the check clears.

Venting and Flashing on a Fountaintown Quote

Two line items on a roofing estimate deserve more attention than they usually get, because they are where the difference between a roof that lasts and one that disappoints tends to live. The first is ventilation.

It should appear as its own item, with the intake at the soffit and the exhaust at the ridge listed separately, along with what's being added or corrected. If a quote simply says vents included, nobody has looked at whether your attic is balanced, and installing new material over a starved attic is how a roof ages out early.

Getting it right sometimes means work that's not glamorous. Cutting the ridge slot to the proper width, adding baffles at the eave so the insulation stops short of the vent, opening up soffit that was painted shut, or removing a powered fan that has been fighting the ridge vent for years. All of that's modest money next to the roof itself and it belongs in front of you as a decision you get to make, never buried in a lump.

Flashing is the other one. It should be itemized by location: the chimney and whether the counterflashing is being cut into the mortar joints or reused, every wall the roof runs into and whether new step flashing is going in course by course, the kick-out at the bottom of each of those walls, the collars on the plumbing stacks, the drip edge at eaves and rakes, and the valley treatment. Each of those has a right way and a fast way.

The reason to insist on the detail is simple. Almost every leak we chase on a roof that's not worn out comes from one of those transitions rather than from the field of shingles. Material is what people shop for, but flashing is what keeps the water out, and a quote that treats it as an afterthought is telling you how the work will be done long before anybody shows up at your house.

Fountaintown Neighborhoods We Have Roofed

Every neighborhood in and around Fountaintown where we've done roofing work is listed here. Click through for what our crews learned on those roofs.

Where we respond near Fountaintown

Indiana-licensed crews dispatched to Fountaintown and the closest surrounding communities.